FEATURES
2-Way Full Range Active/Powered Loudspeaker
1 x 12” NEO woofer
1 x 1.75” compression driver with PEI diaphragm
Built-In power amplifier
Dynamic Fusion Technology™ (DFT)
High SPL and sensitivity
Line input: 2 x Combined 1/4 inch/XLR
Audio output: 1 x XLR
Frequency response: 60Hz~20kHz
Sensitivity: 97dB (1m/1W)
Handling power: 400 Watts (RMS) @ 4 ohms, 800 Watts (PEAK) @ 4 ohms
Power AC: 110V for USA & Canada. 220V for Asia and Europe
Computer-aided design to optimize frequency and phase response
Independent crossover circuit provides low distortion and interfere
Convenient handle on speaker box
Protective grill: Black perforated steel
Flexible and easy-to install configurations (wall, ceiling, under balcony)
Applications: Restaurants, clubs, bars, conference rooms, churches, schools and homes
TECH SPECS
Type: Front
Cabinet Type: High Intensity Plywood
Supported Fixture: Ceiling Mount, Wall Mount, Floor Stand
Woofer: 12 inches (1 unit)
Max. Power Handling: 800 Watts
Rated Impedance: 4 ohms
Spot Range: 1.75” Compression Driver with PEI Diaphragm
Dispersion Angle: H90° x V60° (-6dB)
Frequency Response: 80Hz~20kHz (-3dB)
Maximum SPL: 128 dB
Sensitivity: 97dB (1m/1W)
Line input: 2 x Combined 1/4 inch/XLR
Audio output: 1 x XLR
Flying Points: 12 x M8
Highlighted Features: NEO Loudspeaker
Amplifier Module
RMS Output Power: 2 x 350 Watts / 4 ohms
S/N Ratio: 95 dB
Damping Factor: >500@100Hz
Protection: over voltage protection up to 135/264V AC, overload output protection, clip, limiter
Dimension (WxHxD): 15×22.6×13.8 in / 38×57.5×35 cm (each)
Packing Dimension (WxHxD): 17.9×25.8×16.7 in/45.5×65.5×42.5 cm (each)
Net Weight: 37.5 Lbs / 17 Kg (each)
Shipping Weight: 41.9 Lbs / 19 Kg (each)
UPC Code: 743062981596
FEATURES
Driver:
10 inch woofer (1 full-range woofer)
3 inch tweeter (2 tweeters)
Copper wired voice coil
Double magnet (woofer & tweeter)
Cabinet:
Color: Black
PVC layer, plywood
2-way full-range design
Front Grill: adjustable 180 degrees
Woofer in middle, tweeters on left and right of woofer
Mountable screws (8mm Alan screw) top of cabinet (allow for wall/ceiling mounting)
Mountable screws (8mm Alan screw) bottom of cabinet (allow mounts on floor-stand)
Wire inputs located on rear of cabinet (double banana type)
TECH SPECS
Recommended Usage: Main speaker (maximum 500 sq ft.)
Type: 2-Way full-range (floor-stand or wall/ceiling mounted)
Woofers: Single 10 inches
Tweeters: Dual 3 inches
Single Bass Reflex
Gold-Plated Brass Inputs (double MDP Banana Premium type)
Frequency Response: 40 Hz~ 20 kHz
Sensitivity: 90 dB
Input Power Maximum: 450 Watts
Crossover Frequencies: 2 kHz
Nominal Impedance: 8 ohm
Dimensions (WxHxD): 19.8 x 11.5 x 11 inches
Packing Dimensions (WxHxD): 26 x 23 x 14.5 inches (pair)
Net Weight: 22.6 Lbs / 10.3 Kg (each)
Shipping Weight: 50.8 Lbs / 23 Kg (pair per box)
UPC Code: 743062980193
FEATURES
High output SPL and sensitivity
1 x 12” high power low frequency transducer with 75mm~100mm voice coil
Sensitivity 92dB, max SPL 123dB
RMS 300W, Peak 1200W
Built-in power amplifier module
Master volume control
XLR input and output connectors
Built in variable crossover 80Hz~250Hz high cut
Phase switch
Computer-aided design to optimize frequency and phase response
Cabinet designed for FOH use
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinet
Powder coated grill with foam backing
Durable Polyurethane textured base paint
TECH SPECS
Type: Subwoofer
Max. Power Handling: 1200 Watts
Cabinet Type: Selected High intensity Plywood
Supported Fixture: Ground
Woofer: 12” (1 unit)
“Spot” Range: Exponential LF Horn Configuration
Frequency Response: 40Hz ~ 250Hz
Sensitivity: 92 dB
Highlighted Features: 75mm Voice Coil
Dimensions (WxHxD): 18.1×17.8×14.6 in / 46×45.2×37 cm
Packing Dimensions (WxHxD): 21.7×20.1×21.7 in / 55×51×55 cm (each)
Net Weight: 52 lbs / 23.6 Kg (each)
Shipping Weight: 58 lbs / 26.3 Kg (each)
UPC Code: 743062980377
FEATURES
2-Way full range speaker
8 x 4” tweeter [1” voice oil mid/high unit]
Lightweight aluminum enclosure
Multi combinations and installations ways
Delivering a smooth full frequency spectrum sound
Portable/Compact Design
Handling power: 300 Watts (RMS) @ 4 ohms, 600 Watts (PEAK) @ 4 ohms
2 x Speakon NL4 connector
Protective grill: Black perforated steel
Applications: Restaurants, clubs, bars, conference rooms, churches, schools and homes
TECH SPECS
Type: Front
Supported Fixture: Wall Mount, Floor Stand
Tweeter: 4” (8 units)
Peak Power: 600 Watts
RMS Power: 300 Watts
Rated Impedance: 8 ohms
Frequency Response: 120Hz ~ 18kHz (-3dB)
Sensitivity: 96dB/1W/1M
Maximum SPL: 127 dB (by measurement)
Dimension (WxHxD): 5.3 x 41.3 x 6.7 in / 13.5 x 105 x 17 cm
Packing Dimension (WxHxD): 9.7 x 44.5 x 8.3 in / 24.5 x 113 x 21 cm
Net Weight: 24.3 lbs / 11 kg
Shipping Weight: 28.6 lbs / 13 kg
UPC Code: 743062981619
FEATURES
High output SPL and sensitivity
1 x 15” high power low-frequency transducer with 75mm~100mm voice coil
Built-in power amplifier modules
Can be combined with two 150W full-range speaker
Volume control (Bass, Treble, Line Volume, Sub Volume, Balance, and High Cut)
RCA audio input
Dedicated microphone inputs with volume control
Speakon output connectors
Built-in variable crossover 80Hz~250Hz high cut
Computer-aided design to optimize frequency and phase response
A cabinet designed for FOH use
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high-quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinet
Powder-coated grill with foam backing
Durable Polyurethane textured base paint
TECH SPECS
Type: Subwoofer
Max. Power Handling: 500W+150W+150W
Cabinet Type: Selected High-intensity Plywood
Supported Fixture: Ground
Woofer: 15” (1 unit)
“Spot” Range: Exponential LF Horn Configuration
Frequency Response: 80Hz ~ 250Hz
Sensitivity: 123 dB
Rated Impedance: 8 ohm
Highlighted Features: 75mm Voice Coil
Dimensions (WxHxD): 23.6×19.3×22.9 in / 60x49x58.1 cm
Packing Dimensions (WxHxD): 28.7×24.8×28 in / 73x63x71 cm (each)
Net Weight: 105.8 Lbs / 48 Kg (each)
Shipping Weight: 112.4 Lbs / 51 Kg (each)
UPC Code: 743062980384
FEATURES
High SPL and sensitivity
2 x 6.5” high power low-frequency transducer
1 x 1” PEI diaphragm compression driver
Passive configuration
140° x 140° wide-angle coverage pattern
1 x NL4 connector (included in the package)
Computer-aided design to optimize frequency and phase response
Multi-purpose cabinet design for FOH or monitor use
Use as a main system with or without sub-speaker augmentation
Suitable for speech and background music
Flexible and easy-to-install configurations (wall, ceiling, under balcony)
U bracket and a top holder of the speaker stand are included in the package
Powder coated grill
Durable Polyurethane textured base paint
TECH SPECS
Type: Front (2-Way Full Range)
Max. Power Handling: 320 Watts
Cabinet Type: PVC, Plywood
Supported Fixture: Ceiling, Wall Mount, Floor Stand
Woofer [Low Frequency]: 6.5 inches (2 unit) aluminum alloy cone
Spot Range: 1” Compression driver with PEI diaphragm
Rated Impedance: 8 ohms
Frequency Response: 70Hz ~ 18kHz ( ± 3 dB)
Sensitivity: 93 dB/1W/1M
Crossover Frequency: 3kHz
Speaker input: 1 x Speakon NL4 connector
Recommended Usage: Rear or post vocal/monitor speaker
One Bass Reflex
Dimension (WxHxD): 8.4×21.3×7.6 in / 21.2×54.1×19.4 cm (each)
Packing Dimension (WxHxD): 23.3×11.9×12.3 in / 59.2×30.2×31.2 cm(single unit per box)
Net Weight: 22 lbs / 10 Kg (each)
Shipping Weight: 27 lbs / 12.2 kg (single unit per box)
UPC Code: 743062980322
FEATURES
2-Way full-range passive speaker
1 x 10” high power low-frequency transducer
1 x 1.7” titanium diaphragm compression driver
1 x NL4 connector
Dynamic Fusion Technology™ (DFT)
High SPL and sensitivity
55~100° x 50° controlled coverage pattern
Frequency response 70Hz~20kHz
Sensitivity 94dB
Computer-aided design to optimize frequency and phase response
Multi-purpose cabinet design for FOH or monitor use
Integral 35mm pole mount receptacle for stand or vertical installation
Combine with any Better Music Builder high-power sub speaker for extended low frequency, high-quality music reproduction Powder coated grill
An Independent crossover circuit provides low distortion and interferer
Suitable for all kinds of rock bars, entertainment bars, nightclubs, all kinds of living performances, and portability
Flexible and easy-to-install configurations (wall, ceiling, under balcony)
TECH SPECS
Type: Front
Power Rating: Peak 800W; RMS 400W
Cabinet Type: High-Intensity Plywood
Supported Fixture: Ceiling Mount, Wall Mount, Floor Stand
Woofer: 10 inches (1 unit)
Rated Impedance: 8 ohms
Spot Range: Compression driver with 1.7” titanium diaphragm (1 unit)
Frequency Response: 70Hz ~ 20kHz (±3dB)
Sensitivity: 94dB/1W/1M
Crossover Frequency: 1.8 kHz
Dispersion: 55~100° x 50° controlled coverage pattern
DC Impedance: 5.6 Ohm
THD: <3%
Highlighted Features: Dynamic Vocal Effect
Dimension (WxHxD): 13×19.8×12.1 in / 33×50.2×30.8 cm (each)
Packing Dimension (WxHxD): 16.9×24.5×16.1 in / 43×62.2×40.8 cm (each)
Net Weight: 37.8 Lbs / 17.1 Kg (each)
Shipping Weight: 44 Lbs / 20 Kg (each)
UPC Code: 743062981718
FEATURES:
System type:2 unit 2-way full range frequency loudspeaker
Rated Power:500 W
Max power:1000W
Peak power:2000W
Nominal impedance:8 Ω
Recommended power amplifier output rating:600 W—1000W@8 Ω
Sensitivity(1W@1m):98 dB
Max SPL(Pmax@1m):125dB@500w (128dB@1000w)
Nominal coverage pattern :90°H×70°V
Frequency response(-10dB):50Hz—20KHz
Crossover modes:Passive
Speaker component:12″(305mm diameter 75mm voice coil)LF driver ×1 1.7″(44mm voice coil)HF driver ×1
Connector:Speakon NL4×2(PIN1+/2+POS. PIN1-/2-NEG.)
Enclosure:18 mm(0.7″)High quality birch plywood
Color:Default is black, other colors can be customized
Dimensions:W375mm x D340mm x H650mm
Weight(each):21.50kg
Shipping weight:23.85kg
Reference applications: Conference rooms, multipurpose halls, churches, auditoriums, small shows
FEATURES:
Power: 140W
Bluetooth version: 5.2
Play mode: BT, AUX, USB, disk
Blue tooth transmission 18m (open area)
Li-battery Capability: 36000mAh
Waterproof: IPX5
Power supply: Type-C port 5V/3A
Frequency range: 20Hz - 20KHz
Battery: Built-in lithium battery
Playtime: Up to 12 hours
Charging time: 9 hours
Dimension: L x H x D: 10*5*10
Weight: 10.5 Lbs
FEATURES:
Power Source: Battery, DC
Number of Loudspeaker: 4
Cabinet Material: ABS+Fabric
Display Screen: No
Intelligent Personal Assistant: None
Built-in Microphone: Yes
Material: ABA+Fabric
Input: AUX, USB, Audio Line
PMPO: 200W
Weight: 8.9 lbs
Support Memory Card: Yes
Remote Control: Yes
Voice Control: No
Private Mold: No
Model: Battleship X12
Made in China
FEATURES
High SPL and sensitivity
1 x 6.5” high power low-frequency transducer
1 x 1.7” PEI diaphragm compression driver
Passive configuration
140° x 140° wide-angle coverage pattern
1 x NL4 connector (included in the package)
Computer-aided design to optimize frequency and phase response
Multi-purpose cabinet design for FOH or monitor use
Use as a main system with or without sub-speaker augmentation
Suitable for speech and background music
Flexible and easy-to-install configurations (wall, ceiling, under balcony)
U bracket and a top holder of the speaker stand are included in the package
Powder coated grill
Durable Polyurethane textured base paint
TECH SPECS
Type: Front (2-Way Full Range)
Max. Power Handling: 160 Watts
Cabinet Type: PVC, Plywood
Supported Fixture: Ceiling, Wall Mount, Floor Stand
Woofer [Low Frequency]: 6.5 inches (1 unit) aluminum alloy cone
Spot Range: 1.7” Compression driver with PEI diaphragm
Rated Impedance: 8 ohms
Frequency Response: 80Hz ~ 18kHz ( ± 3 dB)
Sensitivity: 90 dB/1W/1M
Crossover Frequency: 3.2kHz
Speaker input: 1 x Speakon NL4 connector
Recommended Usage: Rear or post vocal/monitor speaker
One Bass Reflex
Dimension (WxHxD): 8.4×14.3×7.6 in / 21.2×36.4×19.4 cm (each)
Packing Dimension (WxHxD): 21.3×18.3×11.5 in / 54.1×46.5×29.3 cm (pair per box)
Net Weight: 14 lbs / 6.4 kg (each)
Shipping Weight: 34.4 lbs / 15.6 kg (pair per box)
UPC Code: 743062980315
FEATURES
2-Way full range speaker
2 x 6” woofers [low frequency]
2 x 1” compression driver (tweeters [high frequency]) with PEI diaphragm
Dynamic Fusion Technology™ (DFT)
High SPL and sensitivity
Passive configuration
140° x 140° wide angle coverage pattern
Max. Power Handling: 320 Watts
Frequency response 80Hz ~ 20kHz
Sensitivity 94dB
1 x NL4 connector (included in package)
Computer-aided design to optimize frequency and phase response
Speaker Stand Adapter Bracket is included in package
Powder coated grill
Durable polyurethane textured base paint
Suitable for all kind of rock bar, entertainment bar, night club, and live performances
Flexible and easy-to install configurations (wall, ceiling, under balcony)
TECH SPECS
Peak Power: 320 Watts
RMS Power: 160 Watts
Cabinet Type: MDF Wood
Supported Fixture: Wall Mount, Floor Stand
Woofer [Low Frequency]: 6” (2 units)
Tweeter [Middle Frequency]: N/A
Tweeter [High Frequency]: 1” compression driver (2 units)
Rated Impedance: 8 ohms
Frequency Response: 80Hz ~ 20kHz (±3dB)
Sensitivity: 94 dB/1W/1M
Crossover Frequency: 2.4KHz
Dimensions (WxHxD): 8.3 x 29.1 x 7.6 in / 21.2 x 74 x 19.4 cm
Packing Dimensions (WxHxD): 12.4 x 31.1 x 11.6 in / 31.5 x 79 x 29.5 cm
Net Weight: 24.3 Lbs / 11 Kg
Shipping Weight: 29.8 Lbs / 13.5 Kg
UPC Code: 743062980940
Max rated SPL: 127dB
Max peak SPL: 130 dB
Frequency Bandwidth (-6dB): 35Hz—200Hz
Frequency Bandwidth (-10dB): 30Hz—150Hz
Impedance: 4Ω
Nominal Directivity (-6dB): No directivity
Magnet Material: Ferrite
Diaphragm material: Paper + Cloth Edge
Amplification type: Class H
Distortion: <0.02%
Frequency bandwidth: 30Hz – 150Hz
Input: 1-CH Stereo XLR Balanced Input
Output: 1-CH Stereo XLR Balanced Output
Input sensitivity: 1.0V RMS
Signal processing: gain adjustable, crossover point adjustable, phase switchable
Structure
Enclosure: 15mm (0.6″) high quality plywood
Color: Default is black, other colors can be customized
SPECIFICATIONS:
System type: 2 unit 2-way coaxial inverting
Rated power:450W
Max Power:900W
Peak power:1800W
Nominal impedance:8 Ω
Recommended power amplifier output rating:500W—800W@8 Ω
Nominal sensitivity(1W@1m):97dB
Max SPL(Pmax@1m):123dB@450W(126 dB @900W,)
Frequency response(-10dB):58Hz—20KHz
Nominal coverage pattern(-6dB):90°H×90°V
Speaker component:Ferrite HF driver 1.75″(44mm voice coil)×1
Ferrite LF driver 12″(300mm diameter, 65mm voice coil) ×1
Crossover modes: Passive 2-way
Connector:Speakon NL4×2(PIN1+/2+POS. PIN1-/2-NEG.)
Enclosure:18mm(0.7″)High quality birch plywood
Color:Default is black, other colors can be customized
Dimensions:W550mm x D442.7mm x H356mm
Weight(each) :17.55kg
Shipping weight:19.65kg
Reference applications::Multipurpose halls, bars, stadiums, all the applications that need to be monitored
FEATURES
1 x 12″ woofer [3″ voice coil low-frequency woofer]
Built-In power amplifier
Portable/compact design
Digital amplifier with DSP and outputs
Audio input: 1 x XLR
Audio output: 1 x XLR
Speaker output: 1 x Speakon NL4 connector
Handling power: RMS 450 Watts, PEAK 900 Watts
Suitable for use with any full range or mid/high speaker
Convenient handle on subwoofer box
Protective grill: Black perforated steel
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinet
TECH SPECS
Type: Subwoofer
Supported Fixture: Ground
Woofer: 12″ (1 unit)
Peak Power: 900 Watts
RMS Power: 450 Watts
Rated Impedance: 4~8 ohms
Frequency Response: 35Hz ~ 500Hz (+/-3dB)
Sensitivity: 95dB/1W/1M
Maximum SPL: 122 dB (by measurement)
Highlighted Features: Built-In Power Amplifier
Speaker Output Connector: Speakon NL4 x 1 (+1 -1)
Dimensions (WxHxD): 14.4×19.5×19.3 in / 36.5×49.5×49 cm
Packing Dimensions (WxHxD): 22.2x23x17.1 in / 56.5×59.5×43.5 cm
Net Weight: 50.5 Lbs / 22.9 Kg
Shipping Weight: 58.2 Lbs / 26.4 Kg
UPC Code: 74306298190
FEATURES
1 x 12” woofer [3“ voice coil low frequency woofer]
Built-In power amplifier
Portable/Compact Design
Digital amplifier with DSP and two outputs
Link input & output
Line input & output (XLR)
2 x Speakon NL4 connector
Convenient handle on subwoofer box
Power output: 2 x 700 Watts @ 4 Ohm
Protective grill: black perforated steel
Applications: Restaurants, clubs, bars, conference rooms, churches, schools and homes
TECH SPECS
Type: Subwoofer
Max. Power Handling: 1400 Watts
Cabinet Type: High Intensity Plywood
Supported Fixture: Ground
Woofer: 12” (1 unit)
Rated Impedance: 4 ohms
Frequency Response: 40Hz ~ 300Hz
Highlighted Features: Built-In Power Amplifier
Maximum SPL: 122dB (Continuous), 128dB (Peak)
Dimensions (WxHxD): 12.8×21.1×20.3 in / 32.5×53.5×51.5 cm (each)
Packing Dimensions (WxHxD): 23.8×24.9×16.3 in / 60.5×63.2×41.5 cm (each)
Net Weight: 55 lbs / 24.9 Kg (each)
Shipping Weight: 62 lbs / 28.1 Kg (each)
UPC Code: 743062981190
Newest Release: 2024 Singtronic BT-888Pro Professional 12" Woofer 3-Way High Power 1000W Pre-Amplifier Bluetooth Speaker Karaoke System with Built in 15.6" LCD Touch Screen, MP3, USB Voice Record and FM Radio Station. Free: 2 x UHF Wireless Microphone, It is perfect for house party's or home us. Singtronic BT-888Pro is Built mainly for Karaoke Singing Purpose with Echo, Delay, Repeat, Treble, Bass
Package Include:
Singtronic BT-888Pro Bluetooth Karaoke Speaker
Professional 2 x UHF Wireless Handheld Microphone
Remote Control
Power Cable & Audio Cable
Operation Manual
Max Power Output: 1000W
Free: 2 x UHF Wireless Microphones
Built in 15.6" Touch Screen
Youtube on Screen To Select Songs
Unlimitted Youtube Select Songs by Iphone or Androids
Built in Wifi & USB Recording Function
Operated by Iphone/Ipad and Android PC Tablets System
1 x 12" Subwoofer
1 x 2.5" Horn (Super Tweeter)
HDMI Output: Connect to any TV Screen
Optical Input: Connect to Smart TV
Built-in 4 x Caster Wheels for easy Transport
Frequency range: 60Hz - 20kHz
S/N ratio: >70dB
Sensitivity: 500mV+/-50mV
Dual Input voltage: 110V~240V
Main Volume Control
Music Volume Control
Volume Treble
Volume Bass
Microphone Volume
Echo Volume Control
Guitar Input & Separate Volume
Next (Next Song)
Prev (Previous Song
Play (Play/Pause Music)
Input Mode: Line In/ Bluetooth/USB/FM)
Full range stereo sound reproduction
Impressive bass response
Includes 2 wireless UHF handheld microphone
Built-in high capacity rechargeable battery (4 to 6 Hours)
Digital LCD Display with FM Radio
(2) 1/4'' Microphone Inputs
RCA (L/R) Aux Input (Connect from Smart TV)
Recording function via USB Flash or Micro SD for Public Speaking Purpose
Bluetooth wireless audio streaming from smartphones & tablets with 60 ft Bluetooth range
Microphone battery operated: requires 2 x 'AA'
USB flash input with MP3 player
Handles and rolling wheels built-in for easy carrying around
Product dimension (H x W x L): 34 x 16 x 11 inches
Shipping dimension ( H x W x L) : 38 x 20 x 17 inches
Product weight: 48 lbs
Specifications:
Frequency Range (-10 dB): 27 Hz – 220 Hz
Frequency Response (±3 dB): 33 Hz – 220 Hz
Input Connection Modes: Switchable, +1/-1 or +2/-2
Internally selectable, Parallel or Discrete
Recommended Crossover Frequencies: 80 Hz, 24 dB / octave HPF80 Hz, 24 dB / octave LPF
Power Rating(Continuous1 / Program / Peak): Parallel: 1600 W / 3200 W / 6400 W
Maximum SPL2: 136 dB SPL peak
Sensitivity (1w @ 1m): 98 dB SPL
LF Driver: 2 x JBL 2268H 457 mm (18 in) Differential Drivewoofer with neodymium-magnet and dual voice-coils
Nominal Impedance: Parallel: 4 ohms
Discrete: 8 ohms x 2Active Tunings: dbx DriveRack, all models. Settings available atwww.jblpro.com
Enclosure: Rectangular, 18 mm, 13-ply birch plywood
Finish: Black DuraFlex finish
Grille: Powder coated, black, 16-gauge perforated steel withacoustical transparent charcoal foam backing.
Removable JBL badge and punched JBL logo.
Input Connectors: Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 602 mm x 1067 mm x 838 mm(23.7 in x 42 in x 33 in)Net Weight: 76 kg (166.5 lb)
Optional Accessories: SRX728S-CVR: Pull-over padded cover
Features:
2-Way Full Range PVC/Plywood Speaker
3”x2 tweeters [paper cone high frequency drivers]
10”x1 woofer [low frequency woofer]
High output SPL and sensitivity
Copper wired voice coil
Speaker input terminal (banana plug or insert type)
Frequency response 45Hz~17kHz
Sensitivity 92dB
Front grill adjustable 180 degrees
Cabinet design for FOH use
Flexible and easy-to install configurations (wall, ceiling, under balcony)
Specifications:
Type: Front (2-Way Full Range)
Max. Power Handling: 720 Watts
Cabinet Type: PVC, Plywood
Supported Fixture: Ceiling, Wall Mount, Floor Stand
Woofer: 10 inches (1 unit)
Tweeter: 3 inches (2 units)
Rated Impedance: 8 ohms
Frequency Response: 45Hz~17kHz ( ± 3 dB)
Sensitivity: 92 dB/1W/1M
Crossover Frequency: LF: 300Hz / HF: 6.3kHz
Dimension (WxHxD): 19.8 x 11.5 x 10.6 in / 50.2 x 29.2 x 27 cm
Packing Dimension (WxHxD): 26.2 x 23.2 x 14.6 in / 66.5 x 59 x 37 cm (pair)
Net Weight: 22 lbs / 10 kg (each)
Shipping Weight: 48.5 lbs / 22 kg (pair)
UPC Code: 743062980605
Features
2-Way Full Range Plastic Speaker with Coaxial Horn
High output SPL and sensitivity
1 x 10” high power transducer with 50mm voice coil
1 x 3” high frequency coaxial driver
100º x 100º controlled coverage pattern
Injection molded
2 x NL4 connector
Cabinet design for FOH and Monitor use
Suitable for use as a main system with or without sub speaker augmentation
Portable system (stand), or permanent installation (wall, ceiling, under balcony)
Vent designed to reduce port noise
Tech Specs
Type: Center Monitor
Max. Power Handling: 400 Watts
Cabinet Type: Plastic
Supported Fixture: Ground, Wall Mount, Floor Stand
Woofer: 10 inches (1 unit)
Tweeter: 2-Way Full Range, HF Horn
Frequency Response: 65 Hz ~ 15 kHz
Sensitivity: 93 dB
Crossover Frequency: 3 kHz
Dimension (WxHxD): 14.8×18.3×12.4 in / 37.6×46.4×31.6 cm
Packing Dimension (WxHxD): 16.8×20.5×14.5 in / 42.7×52×36.8 cm
Net Weight: 20.4 Lbs / 9.3 Kg (each)
Shipping Weight: 24.4 Lbs / 11.1 Kg (each)
UPC Code: 743062980278
FEATURES
2-Way Full Range Plastic Speaker with Coaxial Horn
High output SPL and sensitivity
1 x 8” high power transducer with 50mm voice coil
1 x 3” high frequency coaxial driver
100º x 100º controlled coverage pattern
Built-in power amplifier module
Aux and Line volume control
Bass and Treble control
Stereo 6.35mm unbalanced input and output connectors
1 x 6.35mm unbalanced Aux input
Switchable between Mic and Line input
1 x NL4 output
Injection molded
Cabinet design for FOH and Monitor use
Suitable for use as a main system with or without sub speaker augmentation
Portable system (stand), or permanent installation (wall, ceiling, under balcony)
Vent designed to reduce port noise
TECH SPECS
Type: Center Monitor
Max. Power Handling: 300 Watts
AC Power Supply: 110 Voltage
Cabinet Type: Plastic
Supported Fixture: Ground, Wall Mount, Floor Stand
Woofer: 8 inches (1 unit)
Tweeter: 3 inches (1 unit)
Frequency Response: 65 Hz ~ 15 kHz
Sensitivity: 110 dB SPL
Crossover Frequency: LF=120 Hz, HF=6.3 kHz
Dimension (WxHxD): 12.7×15.6×10.7 in / 32.3×39.7×27.1 cm
Packing Dimension (WxHxD): 14.7×17.8×12.6 in / 37.4×45.3×32.1 cm
Net Weight: 18.7 Lbs / 8.5 Kg (each)
Shipping Weight: 23.2 Lbs / 10.5 Kg (each)
UPC Code: 743062980261
Features
2-Way Full Range Active Coaxial Horn
High output SPL and sensitivity
1 x 12” high power transducer with 50mm voice coil
1 x 1.3” diaphragm compression coaxial driver
90º x 40º controlled coverage pattern
Rotatable Horn
Built-in power amplifier module
Aux and Master volume control
Bass and Treble control
Stereo 6.35mm unbalanced input and output connectors
1 x 6.35mm unbalanced Aux input
Switchable between Mic and Line input
1 x NL4 output
Injection molded
Cabinet design for FOH and Monitor use
Suitable for use as a main system with or without sub speaker augmentation
Portable system (stand), or permanent installation (wall, ceiling, under balcony)
Vent designed to reduce port noise
Tech Specs
Type: Center Monitor
Max. Power Handling: 600 Watts
AC Power Supply: 110 Voltage
Cabinet Type: Plastic
Supported Fixture: Ground, Wall Mount, Floor Stand
Woofer: 12 inches (1 unit)
Tweeter: 2-Way Full Range
Frequency Response: 50 Hz ~ 20 kHz
Sensitivity: 115 dB SPL
Crossover Frequency: LF=120 Hz, HF=6.3 kHz
Dimension (WxHxD): 17.3×21.3×14.7 in / 44×54.2×37.4 cm
Packing Dimension (WxHxD): 19.3x24x16.5 in / 49×61×41.9 cm
Net Weight: 36.4 Lbs / 16.5 Kg (each)
Shipping Weight: 42 Lbs / 19.1 Kg (each)
UPC Code: 743062980308
Features
3-Way Full Range
The full system includes:
4 x R4 mid/high frequency cabinet consisting of 1 x Ribbon and 2 x 4” drivers
1 x R8 Subwoofer cabinet comprising of 2 x 8” subwoofer
Built-in power amplifier module and DSP speaker processing within the R8
The DSP includes PEQ, Crossover and Slope, Delay, Gain and Limiter and is programmable via either RS232 or USB by PC
RS-485 allows multiple systems to be connected together for control
Compact design suitable for various application situations
Up to 40kHz frequency range due to adoption of ribbon tweeter
Low distortion due to utilization of unique thin foam surround & specially coated paper cone
Multi-speaker array configurable for flying in different venues, with splay angle adjustable by 1° increment
600W DSP active amplifier
S-232/USB/RS-485 Ports available for system control
Software included
Master volume control
XLR input and output connectors
Integrated rigging and speaker cabling included for the system
Designed for high speech intelligibility and natural sounding music
Suitable for use as a main system with or without subwoofer speaker augmentation
Permanent installation
Powder coated grill
Durable Polyurethane textured base paint
Up to 4 systems can be arrayed
Applications:
Luxury cinema
Large-sized meeting room
multi-functional hall
Church
Auditorium
Tech Specs
Type: Front
Max. Power Handling: 1100 Watts
Cabinet Type: 15mm Birch Plywood
Supported Fixture: Ceiling / Ground
Woofer [LF]: 8” (2 units) Low Frequency
Tweeter [MF]: 4” (2 units) Drivers
Tweeter [HF]: 1 unit Ribbon Driver
Rated Impedance: 8 ohms
“Spot” Range: Compression Driver
Frequency Response: 50Hz ~ 20kHz
Amplifier Type: Class H
LF Amplifier Power: 300W RMS
HF Amplifier Power: 75W x 4 RMS
Line Input Sensitivity: +4dBu
Max. SPL: 115 dB / 121 dB (PEAK)
Dispersion (HxV): 120° x 30°~90°
Input Impedance: 20k ohm balanced input; 10k ohm unbalanced input
Connector R8: XLR Line Input/Output, XLR RS485 Input/Output, 2 x NL4 Output R4
Highlighted Features: High power
Dimensions (WxHxD): 19.4 x 35.4 x 24 in / 49.2 x 90 x 60.8 cm
Packing Dimensions (WxHxD): 27.4 x 22.8 x 27.4 in / 69.6 x 58 x 69.6 cm
Net Weight: 99.2 Lbs / 45 Kg
Shipping Weight: 110 Lbs / 50 Kg
UPC Code: 743062980926