Features R-10: 1 x 10″ woofer R-18: 1 x 18″ woofer Power Rate: R-10: RMS 300 Watts, Peak 600 Watts; R-18: Peak 1200W; RMS 600W (1kHz, 8 ohm) R-18 Built-In power amplifier Portable/Compact Design Sets up quickly and is ready for use in no time at all Fully active component management (gain adjustment) for utmost flexibility and utility All components needed for safe operation on board and optimized to suit user needs Mid/high units may be used separately Flight case included Applications: Party Meeting Public Home   Tech Specs for R-10 Type: Two-Way Speaker Max. Power Handling: 600 Watts Supported Fixture: Ceiling / Ground Woofer [LF]: 10″ (1 unit) Low Frequency Tweeter [HF]: 2″ (1 unit) High Frequency Rated Impedance: 8 ohms Frequency Response: 65Hz ~ 20kHz Directivity Angle: H90°×V40° Sensitivity: 103dB Maximum SPL: 103dB Connection: 2×NL 4 speakon Cabinet Type: 15-Birch Plywood Cabinet Surface Treatment: Black Catalyzed Polyurethane Paint Dimensions (WxHxD): 22.2×11.8×14.6 in / 56.5x30x37 cm (1 Speaker) Case Dimensions (WxHxD): 28×24.3×27.5 in / 71.1×61.7×70 cm (2 Speaker + 1 Case) Net Weight: 46.3 lbs / 21 Kg (1 Speaker) Shipping Weight: 170 lbs / 77 Kg (2 Speaker + 1 Case)   Tech Specs for R-18 Type: Subwoofer Max. Power Handling: 1200 Watts Supported Fixture: Ceiling / Ground Woofer: 18″ (1 unit) Rated Impedance: 8 ohms Frequency Response: 40Hz ~ 250Hz Highlighted Features: Built-In Power Amplifier Sensitivity: 99dB (2.83V/m) Maximum SPL: 126dB Connection: 2×NL 4 speakon Amplifier: Power: 400W+400W+900W/8 ohms with DSP THD at 1 KHz and 1dB below clipping: 0.7% Hum and Noise: 92dB Slew Rate: 35V/uS Damping Factor: 200 Input Connectors: XLR Combo Link Connectors: XLR Male Limit and Clip Indicator: Red LED Power ON Indicator: Green LED Sensitivity Switch: 0.7V Treble/Bass EQ MIC/LINE Switch Cabinet Type: 15-Birch Plywood Cabinet Surface Treatment: Black Catalyzed Polyurethane Paint Standard Power: AC 110V/~60Hz (North America Market) / AC 220V/~50Hz (Asia or Europe Market) Dimensions (WxHxD): 22.2×29.1×27.8 in / 56.5x74x70.5 cm (1 Subwoofer) Case Dimensions (WxHxD): 30.5×39.5×27.5 in / 77.5×100.3×70 cm (1 Subwoofer + 1 Case) Net Weight: 119 lbs / 54 Kg (1 Subwoofer) Shipping Weight: 192 lbs / 87 Kg (1 Subwoofer + 1 Case) UPC Code: 743062981411

Read more less

Features 3-Way Full Range The full system includes: 4 x R4 mid/high frequency cabinet consisting of 1 x Ribbon and 2 x 4” drivers 1 x R8 Subwoofer cabinet comprising of 2 x 8” subwoofer Built-in power amplifier module and DSP speaker processing within the R8 The DSP includes PEQ, Crossover and Slope, Delay, Gain and Limiter and is programmable via either RS232 or USB by PC RS-485 allows multiple systems to be connected together for control Compact design suitable for various application situations Up to 40kHz frequency range due to adoption of ribbon tweeter Low distortion due to utilization of unique thin foam surround & specially coated paper cone Multi-speaker array configurable for flying in different venues, with splay angle adjustable by 1° increment 600W DSP active amplifier S-232/USB/RS-485 Ports available for system control Software included Master volume control XLR input and output connectors Integrated rigging and speaker cabling included for the system Designed for high speech intelligibility and natural sounding music Suitable for use as a main system with or without subwoofer speaker augmentation Permanent installation Powder coated grill Durable Polyurethane textured base paint Up to 4 systems can be arrayed Applications: Luxury cinema Large-sized meeting room multi-functional hall Church Auditorium   Tech Specs Type: Front Max. Power Handling: 1100 Watts Cabinet Type: 15mm Birch Plywood Supported Fixture: Ceiling / Ground Woofer [LF]: 8” (2 units) Low Frequency Tweeter [MF]: 4” (2 units) Drivers Tweeter [HF]: 1 unit Ribbon Driver Rated Impedance: 8 ohms “Spot” Range: Compression Driver Frequency Response: 50Hz ~ 20kHz Amplifier Type: Class H LF Amplifier Power: 300W RMS HF Amplifier Power: 75W x 4 RMS Line Input Sensitivity: +4dBu Max. SPL: 115 dB / 121 dB (PEAK) Dispersion (HxV): 120° x 30°~90° Input Impedance: 20k ohm balanced input; 10k ohm unbalanced input Connector R8: XLR Line Input/Output, XLR RS485 Input/Output, 2 x NL4 Output R4 Highlighted Features: High power Dimensions (WxHxD): 19.4 x 35.4 x 24 in / 49.2 x 90 x 60.8 cm Packing Dimensions (WxHxD): 27.4 x 22.8 x 27.4 in / 69.6 x 58 x 69.6 cm Net Weight: 99.2 Lbs / 45 Kg Shipping Weight: 110 Lbs / 50 Kg UPC Code: 743062980926

Read more less

FEATURES 2-Way full range speaker 2 x 6” woofers [low frequency] 2 x 1” compression driver (tweeters [high frequency]) with PEI diaphragm Dynamic Fusion Technology™ (DFT) High SPL and sensitivity Passive configuration 140° x 140° wide angle coverage pattern Max. Power Handling: 320 Watts Frequency response 80Hz ~ 20kHz Sensitivity 94dB 1 x NL4 connector (included in package) Computer-aided design to optimize frequency and phase response Speaker Stand Adapter Bracket is included in package Powder coated grill Durable polyurethane textured base paint Suitable for all kind of rock bar, entertainment bar, night club, and live performances Flexible and easy-to install configurations (wall, ceiling, under balcony)   TECH SPECS Peak Power: 320 Watts RMS Power: 160 Watts Cabinet Type: MDF Wood Supported Fixture: Wall Mount, Floor Stand Woofer [Low Frequency]: 6” (2 units) Tweeter [Middle Frequency]: N/A Tweeter [High Frequency]: 1” compression driver (2 units) Rated Impedance: 8 ohms Frequency Response: 80Hz ~ 20kHz (±3dB) Sensitivity: 94 dB/1W/1M Crossover Frequency: 2.4KHz Dimensions (WxHxD): 8.3 x 29.1 x 7.6 in / 21.2 x 74 x 19.4 cm Packing Dimensions (WxHxD): 12.4 x 31.1 x 11.6 in / 31.5 x 79 x 29.5 cm Net Weight: 24.3 Lbs / 11 Kg Shipping Weight: 29.8 Lbs / 13.5 Kg UPC Code: 743062980940

Read more less

FEATURES High SPL and sensitivity 1 x 6.5” high power low-frequency transducer 1 x 1.7” PEI diaphragm compression driver Passive configuration 140° x 140° wide-angle coverage pattern 1 x NL4 connector (included in the package) Computer-aided design to optimize frequency and phase response Multi-purpose cabinet design for FOH or monitor use Use as a main system with or without sub-speaker augmentation Suitable for speech and background music Flexible and easy-to-install configurations (wall, ceiling, under balcony) U bracket and a top holder of the speaker stand are included in the package Powder coated grill Durable Polyurethane textured base paint   TECH SPECS Type: Front (2-Way Full Range) Max. Power Handling: 160 Watts Cabinet Type: PVC, Plywood Supported Fixture: Ceiling, Wall Mount, Floor Stand Woofer [Low Frequency]: 6.5 inches (1 unit) aluminum alloy cone Spot Range: 1.7” Compression driver with PEI diaphragm Rated Impedance: 8 ohms Frequency Response: 80Hz ~ 18kHz ( ± 3 dB) Sensitivity: 90 dB/1W/1M Crossover Frequency: 3.2kHz Speaker input: 1 x Speakon NL4 connector Recommended Usage: Rear or post vocal/monitor speaker One Bass Reflex Dimension (WxHxD): 8.4×14.3×7.6 in / 21.2×36.4×19.4 cm (each) Packing Dimension (WxHxD): 21.3×18.3×11.5 in / 54.1×46.5×29.3 cm (pair per box) Net Weight: 14 lbs / 6.4 kg (each) Shipping Weight: 34.4 lbs / 15.6 kg (pair per box) UPC Code: 743062980315

Read more less

TECH SPECS 2 x FULL RANGE COLUMN SPEAKER WITH ALUMINIUM CABINET Component: 8 x 2” full range and 1 x 1” high range Nominal Impedance: 8Ω RMS Power Handling: 180W Peak Power Handling: 360W Frequency Response: 100Hz~20KHz Sensitivity (1W/1M): 96dB Dimensions (WxHxD): 3.7 x 2.6 x 24.4 inches Packing Dimensions (WxHxD): 9.8 x 4.7 x 12.6 inches (pair) Net Weight: 15.4 Lbs / 7 Kg (pair) Shipping Weight: 18.3 Lbs / 8.3 Kg (pair)   1 x NON-POWERED SUBWOOFER Component: 2 x 6.5” Nominal Impedance: 4Ω RMS Power Handling: 150W Peak Power Handling: 300W Frequency Response: 42Hz~300Hz Sensitivity (1W/1M): 90dB Dispersion: N/A Dimensions (WxHxD): 10.4 x 16.1 x 18.7 inches Packing Dimensions (WxHxD): 14 x 19.5 x 21.9 inches (each) Net Weight: 25.4 Lbs / 11.5 Kg (each) Shipping Weight: 30 Lbs / 13.5 Kg (each)   1 x POWERED SUBWOOFER Component: 2 x 6.5” Nominal Impedance: 4Ω RMS Power Handling: 150W Peak Power Handling: 300W Frequency Response: 42Hz~300Hz Sensitivity (1W/1M): 90dB Max. SPL: 108dB AMP Output: 900W + 2 x 350W 3 channels digital amp module inside 2 in 4 outs DSP module Dispersion: N/A Dimensions (WxHxD): 10.4 x 16.1 x 18.7 inches Packing Dimensions (WxHxD): 14 x 19.5 x 21.9 inches (each) Net Weight: 37.5 Lbs / 17 Kg (each) Shipping Weight: 41.9 Lbs / 19 Kg (each)   2 x COLUMN SPEAKER STAND WITH BASE 3 x SPEAKER CABLES

Read more less

FEATURES 3-Way Full Range 1”x2 tweeters [paper cone high frequency drivers] 2.75”x12 tweeters [paper cone middle frequency drivers] 8”x2 woofer [low frequency woofer] Column Speakers: RMS 250W, Peak 500W; Subwoofer: RMS 400W, Peak 800W Built-In Power Amplifier Portable/Compact Design Average Mounting Height: 5.9 ft. Handle on Subwoofer Box Fits Truck Pack Cases (Up to two units in Better Music Builder – Road Truck-B) Mono Amp. Output: XLR Mono/Right Output: XLR Recording Output: RCA Aux Input: RCA Balanced Line Inputs/Left & Right: XLR Microphone Inputs: 2 x XLR Power AC: 110V for USA & Canada. 220V for Asia and Europe. Bi-amp module including DSP. Exclusive CLIK together connections, no cables required. Applications: Party Meeting Public Home   TECH SPECS Type: Front Cabinet Type: Selected High Intensity Plywood Supported Fixture: Ground Woofer (LF): 8 inches (2 unit) Low Frequency Tweeter (MF): 2.75 inches (12 unit) Middle Frequency Tweeter (HF): 1 inches (2 unit) High Frequency Rated Impedance: 4 ohms Spot Range: 1 Compression Driver Frequency Response: 45Hz ~ 20kHz Max. Power Handling: Column Speakers: 500 Watts; Subwoofer: 800 Watts Power: LF: 200 Watts, MF: 180 Watts, HF: 30 Watts Sensitivity: 95dB/1W/1M Crossover Frequency: 300Hz between LF & MF, 5KHz between MF & HF Max. SPL: 113 dB / 119 dB (PEAK) Dispersion (HxV): 90° x 40° Input Impedance: 20k ohm balanced input; 10k ohm unbalanced input Input Level: LINE 1: 775mVrms, LINE 2: 200mVrms; MIC 1: 20mVrms, MIC 2: 40mVrms Input Overloading Level: LINE 1: 3.5Vrms, LINE 2: 2Vrms; MIC 1: 200mVrms, MIC 2: 400mVrms Wire Connection: PIN 1: Ground, PIN 2: Signal+, PIN 3: Signal– Highlighted Features: Lightweight and very high power Dimension (WxHxD): Column Speaker: 3.4×22.4×4.3 in / 8.7x57x10.9 cm (each) Subwoofer: 9.8×23.1×15.8 in / 25×58.6×40 cm (each) One Set (2 x Column Speaker + 1 x Subwoofer): 9.8x68x15.8 in /25×172.6×40 cm Packing Dimension (WxHxD): 24 x 27.6 x 13.8 in / 61 × 70 × 35 cm (One Set) Net Weight: Column Speaker: 7.4 Lbs / 3.4 Kg (each) Subwoofer:36.4 Lbs / 16.5 Kg (each) One Set (2 x Column Speaker + 1 x Subwoofer):51.2 Lbs / 23.2 Kg Shipping Weight: 58.2 Lbs / 26.4 Kg (One Set) UPC Code: 743062980902

Read more less

FEATURES High SPL and sensitivity 2 x 6.5” high power low-frequency transducer 1 x 1” PEI diaphragm compression driver Passive configuration 140° x 140° wide-angle coverage pattern 1 x NL4 connector (included in the package) Computer-aided design to optimize frequency and phase response Multi-purpose cabinet design for FOH or monitor use Use as a main system with or without sub-speaker augmentation Suitable for speech and background music Flexible and easy-to-install configurations (wall, ceiling, under balcony) U bracket and a top holder of the speaker stand are included in the package Powder coated grill Durable Polyurethane textured base paint   TECH SPECS Type: Front (2-Way Full Range) Max. Power Handling: 320 Watts Cabinet Type: PVC, Plywood Supported Fixture: Ceiling, Wall Mount, Floor Stand Woofer [Low Frequency]: 6.5 inches (2 unit) aluminum alloy cone Spot Range: 1” Compression driver with PEI diaphragm Rated Impedance: 8 ohms Frequency Response: 70Hz ~ 18kHz ( ± 3 dB) Sensitivity: 93 dB/1W/1M Crossover Frequency: 3kHz Speaker input: 1 x Speakon NL4 connector Recommended Usage: Rear or post vocal/monitor speaker One Bass Reflex Dimension (WxHxD): 8.4×21.3×7.6 in / 21.2×54.1×19.4 cm (each) Packing Dimension (WxHxD): 23.3×11.9×12.3 in / 59.2×30.2×31.2 cm(single unit per box) Net Weight: 22 lbs / 10 Kg (each) Shipping Weight: 27 lbs / 12.2 kg (single unit per box) UPC Code: 743062980322

Read more less

FEATURES 2-Way full range speaker 8 x 4” tweeter [1” voice oil mid/high unit] Lightweight aluminum enclosure Multi combinations and installations ways Delivering a smooth full frequency spectrum sound Portable/Compact Design Handling power: 300 Watts (RMS) @ 4 ohms, 600 Watts (PEAK) @ 4 ohms 2 x Speakon NL4 connector Protective grill: Black perforated steel Applications: Restaurants, clubs, bars, conference rooms, churches, schools and homes   TECH SPECS Type: Front Supported Fixture: Wall Mount, Floor Stand Tweeter: 4” (8 units) Peak Power: 600 Watts RMS Power: 300 Watts Rated Impedance: 8 ohms Frequency Response: 120Hz ~ 18kHz (-3dB) Sensitivity: 96dB/1W/1M Maximum SPL: 127 dB (by measurement) Dimension (WxHxD): 5.3 x 41.3 x 6.7 in / 13.5 x 105 x 17 cm Packing Dimension (WxHxD): 9.7 x 44.5 x 8.3 in / 24.5 x 113 x 21 cm Net Weight: 24.3 lbs / 11 kg Shipping Weight: 28.6 lbs / 13 kg UPC Code: 743062981619

Read more less

FEATURES 2-Way Full Range Active/Powered Loudspeaker 1 x 12” NEO woofer 1 x 1.75” compression driver with PEI diaphragm Built-In power amplifier Dynamic Fusion Technology™ (DFT) High SPL and sensitivity Line input: 2 x Combined 1/4 inch/XLR Audio output: 1 x XLR Frequency response: 60Hz~20kHz Sensitivity: 97dB (1m/1W) Handling power: 400 Watts (RMS) @ 4 ohms, 800 Watts (PEAK) @ 4 ohms Power AC: 110V for USA & Canada. 220V for Asia and Europe Computer-aided design to optimize frequency and phase response Independent crossover circuit provides low distortion and interfere Convenient handle on speaker box Protective grill: Black perforated steel Flexible and easy-to install configurations (wall, ceiling, under balcony) Applications: Restaurants, clubs, bars, conference rooms, churches, schools and homes   TECH SPECS Type: Front Cabinet Type: High Intensity Plywood Supported Fixture: Ceiling Mount, Wall Mount, Floor Stand Woofer: 12 inches (1 unit) Max. Power Handling: 800 Watts Rated Impedance: 4 ohms Spot Range: 1.75” Compression Driver with PEI Diaphragm Dispersion Angle: H90° x V60° (-6dB) Frequency Response: 80Hz~20kHz (-3dB) Maximum SPL: 128 dB Sensitivity: 97dB (1m/1W) Line input: 2 x Combined 1/4 inch/XLR Audio output: 1 x XLR Flying Points: 12 x M8 Highlighted Features: NEO Loudspeaker Amplifier Module RMS Output Power: 2 x 350 Watts / 4 ohms S/N Ratio: 95 dB Damping Factor: ＞500@100Hz Protection: over voltage protection up to 135/264V AC, overload output protection, clip, limiter Dimension (WxHxD): 15×22.6×13.8 in / 38×57.5×35 cm (each) Packing Dimension (WxHxD): 17.9×25.8×16.7 in/45.5×65.5×42.5 cm (each) Net Weight: 37.5 Lbs / 17 Kg (each) Shipping Weight: 41.9 Lbs / 19 Kg (each) UPC Code: 743062981596

Read more less